Complete RTF solution for aerial thermography
-
Numerous industrial installations and other constructions are already subject to thermal imaging inspection.Drone thermal data acquisition constitutes a competitive, efficient, quick and reliable solution in order to identify thermal bridge, defective isolation, energy losses or structure deterioration.
Acquisition of quality thermographic data
Thanks to its technical characteristics and performance, the XENA Thermo is the ultimate tool for performing quick radiometric thermal data recordings. A rigorous analyse of the geotagged thermograms obtained allows to take the necessary decision, by having a clear, complete and aerial view of a situation.
As a matter of fact, the XENA Thermo is a professional, robust and versatile system, able to easily embark the FLIR Vue Pro R (640) or the Optris PI 640 with PI LightWeight, two highly efficient and qualitative thermal cameras. They allow to record high quality radiometric thermal data and are perfectly suitable for UAV operations.
Reliable and multivalent system
XENA is a foldable and compact drone that is easily carried in its hard suitcase. It runs with only one battery, which greatly simplify operations on the field.
In addition to thermal diagnostics, the XENA Thermo can be equipped with a sensor allowing it to spot gaz leaks like the FLIR G300 a. This particularity makes it the perfect system to ensure safety on industrial sites.
The XENA Thermo is a made in Europe drone that fulfills all the necessary requirements for an aircraft operating in the European sky.
-
Embedded thermal cameras on drones allow to perform numerous tasks.Among them are present:
- Thermal balance
- Defective isolation detection
- Air leakage detection
- Humidity detection
- Thermal bridges
- District pipelines and heating
- Seepage detection
- Thermal inspection of solar panels
- Thermal inspection of wind turbines
- High voltage infrastructures monitoring
- Mechanical infrastructures monitoring
- Pipelines and similar inspection
- Petrochemical infrastructures monitoring
- Flares detection
- Tank level monitoring
- Hotspots detection
- Aeronautical devices inspection
- Asphalt temperature
- Gaz leak detection (Benzene, Ethanol, Ethylbenzene, Heptane, Hexane, Isoprene, Methanol, MEK, MIBK, Octane, Pentane, 1-Pentene, Toluene, m-xylene, Butane, Methane, Propane, Ethylene and Propylene)
-
XENA Thermo 
Flight time Up to 32 min (FLIR Vue Pro R)
Up to 30 min (Optris PI 640)
Take-Off Weight 4.3 Kg (FLIR Vue Pro R)
4.6 Kg (Optris PI 640)
Max continuous wind speed 50 Km/h 
Max operating altitude (AMSL) 5000 m 
DGLV certified (Belgium) Classe 1a DGAC certified (France) S1, S2 and S3 
Functionnalities Thermal cameras FLIR Vue Pro R Optris PI 640 Optical resolution (pixels) 640 x 512 640 x 480 Spectral band 7.5 - 13.5 µm 7.5 - 13 µm Frame rate 30 Hz (NTSC) / 25 Hz (PAL) 32 Hz Temperature ranges -25°C to 135°C
-40°C to 550°C-20°C to 100°C
0°C to 250°C
150°C to 900°CMeasurement accuracy +/- 5°C in -25°C to 135°C range
+/- 20°C in -40°C to 550°C range+/- 2% with a minimum of 2°C Analog video output Yes Yes HDMI output Yes Yes -
